Where is the fiber laser marking machine generally used? Working principle:The working principle of the laser marking machine is to focus the laser on the surface of the marked object with high energy density, vaporize the material on the surface by burning or etching, and control the effective

2、 Composition of laser marking machine1. Laser power supplyThe laser energy deliver of the fiber laser marking system is a tool that provides energy for the fiber laser, and its enter voltage is ac220v alternating contemporary. it's far installed in the manipulate container of the marking device.2

1、 Principle of laser marking machineLaser marking machine makes use of laser beam to make permanent marks on diverse material surfaces. the impact of marking is to expose deep substances thru evaporation of surface materials, or to "carve lines" thru chemical and bodily changes of surface

(1) High precision, fast speed, narrow cutting seam, minimum heat affected zone, smooth cutting surface without burrs.(2) The laser cutting head will not contact the material surface and will not scratch the workpiece.(3) The slit is the narrowest, the heat affected zone is the smallest, the local

(1) The fiber laser has excessive electro-optical conversion efficiency, with the conversion performance accomplishing more than 30%. the low-electricity fiber laser does no longer need to be ready with a water cooler, and it's miles air-cooled, that can significantly shop the energy consumption,

1) Cutting speed: the speed of fiber laser cutting machine is 4-5 times that of YAG, which is suitable for mass processing and production.2) Usage cost: The usage cost of fiber laser cutting machine is less than that of YAG solid laser cutting machine.3) photoelectric conversion efficiency: the

1) Excellent beam quality: smaller focusing spot, finer cutting lines, higher working efficiency and better processing quality;2) Extremely high cutting speed: twice that of CO2 laser cutting machine with the same power;3) Extremely high stability: the world-class imported fiber laser is adopted,

Laser cutting is simply the use of high power and high density laser beam after focusing the workpiece, so that the irradiated material melting, gasification, or to reach the point of ignition, and the beam coaxial air flow blown off the molten material, to achieve a processing method of cutting

    Metal mold, steel structure, equipment and other items in the process of transportation and storage, due to humidity or sweat or other media contact, it is easy to appear on the surface of the rust phenomenon. Rust is a chemical reaction, which is essentially the oxidation of metals. If the

With the continuous improvement and development of domestic laser technology: laser engraving machines have been widely used in the field of fine engraving of various non-metallic materials. Laser engraving machine can improve the efficiency of engraving, make the surface of the engraved place