Clamped Diameter | 50mm |
Voltage | 220V/110V |
Frequency | 50HZ/60HZ |
Weight | 3kgs |
Driver | MC542A |
Power supply | 24V |
Connection mode | Direct connection |
Reduction ratio | 1 |
Axis height | 115MM (can be tilted 90 degrees, house angle 45 degrees)
|
Chuck | D50. Internal clamping application (product outer diameter 2 to 72mm), external support application (product inner diameter 11 to 82mm). The jaw telescopic range is 12mm.
|
Application card pin | The factory is equipped with four kinds of card needles each with 3 capsules
|
Transmission mode | Synchronous belt 2.5 times deceleration, through hole 23mm
|
Dimensions | 208*120*165MM (length, width and height)
|
Mounting hole size | 100*50MM (M5.M6 screws)
|
Advantages | Strong force, through hole, no shaking. Turntable elastic clamping. Fast loading and unloading improves efficiency. |
The chuck is mainly for rings and bracelets, light and short products |
Submitted successfully
We will contact you as soon as possible